Select Engineered Systems Telephone Entry System Model SES SG2M Select Gate 2 with 2400 Baud Modem and Software (SELSG2/3)
SG2 Series incorporates the latest technology to address both residential and commercial applications. With both PIN access and optional Card or Select Pass transmitter capability, the SG2 is more flexible than ever before. SG2 provides 9 Time Zones for access control and “Do Not Disturb” that provides the owner even more control. It has a capacity to handle 100 PIN’s and cards or transmitters each programmable by time zone as well as function and can make them valid by date or permanent.
These features make it easy to track recent access events. The SG Series is DSL compatible with out any additional equipment required.
SG2 Standard Features:
- -DSL filtering built-in. SG2C transparent to existing or new DSL lines.
- -100 PIN Codes, each programmable by Time Zone and function as well as
making them valid by date or permanent.
- -9 Programmable Time Zones.
- -26 Bit Wiegand input, for Card Reader,
Receiver and Slave Keypad.
- -100 Cards or Transmitters, for access without using the keypad each
programmable by time zone as well as making them valid by date or permanent.
- -Large Event Log Buffer (approx. 800).
- -Calls 10 additional numbers.
- -Call Forward by Time Zone.
- -Works on the existing phone line.
- -Long life white LED lighting.
- -Low power consumption for solar powered applications.
- -Local call waiting and transfer.
- -Programmable by keypad or touch tone phone.
- -Latch the gate (entrance) open from the keypad or remotely with a phone.
(Timed, 1 hour or indefinitely.)
- -Battery charging circuit.
SG series Standard Specifications:
- -2 years limited warranty.(contact SES for the specific details.)
Select Engineered Systems Telephone Entry System Model SG2M Manuals
Select Engineered Systems Telephone Entry System Model SG2M Installer Manual
Select Engineered Systems Telephone Entry System Model SG2M Programmer Manual
Select Engineered Systems Telephone Entry System Model SG2M Serial Adapter Manual
Select Engineered Systems Telephone Entry System Model SG2M Product Sheet
- Mounting dimensions- 7” H x 9 7/16” W x 4 9/16” D
- Construction- Back box: .090 aluminum, primed and
painted black texture for exterior use.
Front door brushed stainless steel.
- Power Input- 16.5 VAC 20 VA plug-in transformer
supplied or 12VDC @ 120ma (nominal).
- Telephone Interconnect- RJ31X jack supplied.
- Operating Environment- Temperature –20 F to +140 F, Relative
Humidity 5% to 95% non-condensing.
- Relay Output (2)- Form C dry contact, 24 V @ 3 AMPS.
- Mounting- Surface, Recessed or Pedestal.
- Memory Type- non-volatile.
- Tone Detection- Crystal controlled capable of detecting
short burst 50 MS. DTMF tone,
(detects touch-tones only).