Linear Radio Controls

The Linear AK11 is an outdoor digital keypad. This unit comes in rugged aluminum casing that can bolt to a wall designed for keyless access control applications.

Linear MT-1B is a single channel block coded remote control transmitter that is visor mounted. This transmitter is MegaCode format, meaning that each Linear remote is factory programmed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Your receiver will ?learn? each specific code, and no unauthorized person can gain access to the system by reprogramming a transmitter.

Linear EXA-1000 Omni-directional Remote Antenna can be connected to the F connector on many Linear receivers to improve their range when they must be located in poor signal reception locations.

The Linear DT-2A is a two-button, two-channel, 9-Volt battery powered visor transmitter with removable visor clip, 128 selectable codes.

The Linear DT is a one-button, one-channel, 9-Volt battery powered visor transmitter with removable visor clip, 256 selectable codes. 310 MHz

The Linear MCT-11 is a one button remote control transmitter designed for use with automatic garage door and gate operators. Operates at 318mhz. No dip switches to set.

Linear ACT-22A 3-Channel Key Ring Transmitter is designed for use with Linear's access control products. The Model ACT-22A is a three-channel device. Pressing the transmitter?s left or right front button sends channel one or two. Pressing both buttons sends channel three. Lithium batteries with a five-year service life are included and the transmitter is supplied with a quick-disconnect key ring. A unique 10-second time-out feature prevents the system from being shut down by a single transmitter transmitting continuously.

The Linear MT-2B 2-Channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MT-2B is a two-channel device. Pressing the left button on the transmitter will send a channel one signal. Pressing the right button on the transmitter will send a channel two signal. A visor clip is included.

Linear DRA 1-Channel 12-volt Receiver is a small economical unit designed for commercial gate and door access control. It is compatible with solid state control boards. Upon receipt of a properly coded signal from a transmitter, it provides a switch operation for both NO and NC circuits. Any Delta-3 transmitter may be coded to activate this receiver, and any number of transmitters may be used to operate this receiver.

Linear DR2 Receiver is a 2 channel wireless radio receiver that can be used to actuate with 2 different garage / gate operator units. Operates at 310MHz with 8 dip switches. Can be activated by any Delta-3 format transmitter.

Linear MDTK wireless keypad model MDTK Compatible with Linear MegaCode Receivers, 318 Mhz frequency, smart button coding - No dip switches to set. The MegaCode radio format provides unparalleled security with more than a million different codes.

Linear DTKP wireless keypad transmitter is compatible with ALL Delta 3 system products 310 Mhz frequency, 8 dip switches. The Delta 3 radio format provides 256 different codes.

Linear MCT-3 3-channel visor transmitter is a wireless radio control designed for use with automatic garage door and gate operators. 318 mhz transmitter, no dip switches to set.

Linear MCT-2 is a two-button, 9-Volt battery powered visor transmitter with removable visor clip, MegaCode format. Operates at 318 Mhz.

Linear MDT-1A 1 Button Remote Control Transmitter is a Moore-o-Matic and Megacode 1 button remote control transmitter that operates at 318MHz.

Linear MDT-2A 2 Button Remote Control Transmitter is designed to use with Linear's access control products. Operates at 318MHz. MegaCode format.

Linear Mini-T Miniature key ring transmitter, black case, white button, key ring supplied, test/operate LED, 256 selectable codes.