Author Archives: admin

How is a Telephone Entry System changing the dimensions of security?

Security is a top priority for both office and home owners. To prevent unwanted entry into the property you need strong security measures. Installing a Telephone Entry System in your home or commercial property will act as a protective shield that allows you to check the identity of a person before entry. The telephone entry is a speed-dialer that is connected to a phone line. A guest dials the code number and the system converts that call into a regular telephone call for you.

A telephone entry system is both time and cost efficient for the owners. It is the best possible way to prevent outside forces infringe upon your property. The security system deals with the constant expense and time taken to replace the lost keys. Keeping track of entries and exit is possible now with this entry system. Install a residential telephone entry system in your home to keep a track of the exits and entries. Linear Telephone Entry System is one of the most trusted devices to secure the property.

Linear Telephone Entry System

A perfect telephone entry system will be the idle protective device for your home or resident. It is the electronic communications system intended for limited or private dialogue, direction, and announcements. It can be portable or mounted permanently in the buildings. The system can incorporate a connection to cell phones, computers, and other devices.

Some of the best telephone entry systems are –

Linear AE-100 Commercial Telephone Entry System

It is a primary access control device for commercial sites with up to 125 residents. It provides access to full duplex telephone communications between visitors and residents. The system also has a built-in microphone and a tamper-resistant speaker.

Linear AE1000 Plus Commercial Telephone Entry with Access Control

It is an advanced commercial telephone entry system with access control capabilities. The entry system also supports and request-to-exit and door status monitoring.

Linear AE2000 Plus Telephone Entry System with Access Control

This advanced Telephone Entry System has access control capabilities and is used for sites with up to 4 doors or gates, each supporting request-to-exit and door status monitoring.

Linear AE-500 Commercial Telephone Entry System

This entry system is for facilities with 250 residents or users. It features a side-lit 12 key telephone style keypad with bright, easy to read graphics and housed in a rugged stainless steel.

Linear RE-1 Residential Telephone Entry System

This telephone entry system is designed for residential or light commercial access control. It also has a keypad, radio receiver, and optional video camera housed in an enclosed enclosure.

Linear RE-2 Residential Telephone Entry System

It is a contemporarily styled telephone entry system for residents. The entry system has a speakerphone, keypad, radio receiver, and optional video camera.

The Linear Telephone Entry System is one of the best supportive devices providing security to residents and commercial properties. Buy an telephone entry system that that fulfills your requirements and at the same time is cost-effective.

What Is a Multicode Remote Control Transmitter?

Multi-code remote control transmitters are used for home and garage security. The security gates are operated through remote controls for easy entry or exit from the property. The user can open or close the gates sitting inside their vehicle. It is important to choose the right control transmitter that fits the needs of your location.

After purchasing the remote, it is important to configure the remote control for best usage. Make sure that the garage door area is cleared of any obstructions. There are different types of remote controls in use today and make sure you get the most useful remote control for your home/garage security settings.

There are multiple uses of a multicode remote control transmitter. One can configure multiple security codes and alter the codes at a regular interval to keep the security in check. The device ensures top-notch security for your property. The programming of the device is easy and swift. But one needs to take care of the program coding for efficient programming.


The device can be installed at the gate entrance and is a multicode a one channel, one button transmitter Multi-Code format, with a 10 position coding switch that provides 1024 possible codes.

Here are the features of a multicode remote

  • Frequency: 310 MHz
  • Comes with visor clip
  • 9v Battery powered
  • Quick access to coding switches and battery
  • 1024 codes
  • Compatible with 310MHz Stanley and Multicode receivers

The remote control transmitter works with any Linear Delta-3 310 MHz Receiver. Programming the remote is simple and just matches the 8 on/off dip switches inside the unit to your existing remote or receiver.

Why You Should Opt For Remote Controlled Gates?

Security has always been one of the top priorities of homeowners and people are willing to go that extra mile to ensure that they adopt every possible means to beef up security on their property. Both commercial and residential properties and other establishments are keen on installing remote controlled gates so that they can turn their property into a completely secure zone.

Often remote controlled gates are equipped with cameras, unlike their non-electric counterparts. These gates offer the house owners with the option to check who is at the gate before allowing them to enter the premises. Multicode remote controls take the hassle out of having to get out of your vehicle to manually open and close your gate.


Remote controlled gates often come with automatic authorization technology. This means that the gates will open after automatic detection of a particular vehicle thus restricting unauthorized vehicle access. It will not allow entry to any unauthorized vehicle thus ensuring a higher level of safety on your premises. If you opt for such remote controlled gates, you’ll need to set up a remote security system and feed in authorization information for ‘recognized ‘vehicles. In most cases, the technology is implemented using a sensor that can identify vehicles.

Remote controlled gates are often operated using a security code though a majority of people use this option only as a backup option of entering the property. These codes are of utmost importance when it comes to safeguarding against potential theft. It is important that the owners are extremely careful about giving out security codes to only a trusted few.


Some remote controlled gates also come with voice communication (Intercoms) features by which the owner can identify the person who is requesting permission to enter the premises. It is no secret that technology has gained a huge importance in this age. Thus the fact that more and more people are keen on installing these gates to protect themselves. The number of customers using remote controlled gates is increasing by leaps and bounds every year.

Commercial Telephone Entry System Secures Apartments and Offices

Your everyday life should be free from compromise and inconvenience. You cannot take a chance with your security at home or work.

The linear AE-100 telephone entry system comes as a robust solution to access control. It provides primary access control for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

From outside it appears to be a rugged stainless steel box. However, inside it has an access control device locked in it. It features a lit 12-key telephone style keypad  with bright, easy-to-read graphics. There is a two-line directory display with programmable welcome message highlighted by backlight. It also has a built-in microphone, speaker, and provision for an optional color CCTV camera.

Its four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.


Since the system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access, the chances of mishaps are greatly reduced. The residents can rest safely while the access control system is there to look after their entrance.

  • It is network ready i.e. can be connected with other entry systems via a network.
  • It has full control over requests to enter and exit with door status monitoring.
  • It has a programmable directory code length and talk time.
  • It manages multiple users i.e. secures commercial sites with up to 125 residents.
  • It has automatic door relock feature which closes the door immediately after door sense input is used.
  • It provides the residents to allow visitor entry using the heavy duty access relay.
  • It has multiple language options such as English, Spanish, French-Canadian, or Portuguese.

This linear AE-100 telephone entry system combines many advantages into one. It has reduced the chances of errors due to human monitoring of buildings. More and more people are switching to this mode of security for their buildings where a large group of people work and live.

Linear Gate Access is a reliable manufacturer of commercial telephone entry systems to meet your specific application requirements. So, if you have a small apartment building, condominium, or gated community, do not leave it unguarded.

How to Set Up Your Multicode Remote Control for Your Garage

A multi-code remote is a device that helps you open and close your garage door remotely. As a garage owner, having this device will help you save time and all of the hassle of having to do things manually.

The multicode remote control comes along with other added security features to ensure the safety of your garage. Before you start enjoying the benefit that the device comes with here is a step by step guide on how to set up your remote control system.


Discover your remote control

This step is critical and helps you to locate your remote or transmitter.

Test your remote

When setting up the system, to ensure that your remote is functioning well, it is highly recommended that you do the testing at different angles. This will help you ensure that your control system is in a position to communicate well with your door while at a distance.

In the event your remote fails, pressing your wall button will help open it. However, in case the door fails for the second time after pressing the wall button, chances are your operator has issues. If it opens after pressing the wall button it is a good indicator that your radio transmitter has some matters that needs to be fixed.

Locate your radio code

Depending on the manufacturer of your remote control, finding your radio code may be tricky. However, removing your back cover of your receiver or locating dip switches near your receiver’s battery compartment will help you trace the codes very quickly.


Typically your radio codes are switched up. The same codes your radio has should be the same as the receiver and the remote switch statutes. In case they are not similar, you should consider returning your system to your dealer or manufacturer.

Set up your radio code

To set up these codes, you can select the digits by using a screwdriver.


After setting up your codes and ensuring that the above rules have been followed, now it’s time to test if your new programming works. Before testing, you should also ensure that the removed covers of your receiver and remote have been snapped back. If your garage door opens, you can go ahead and start using your door opener.

In case the devices cannot be synchronized, it is advisable for you to contact your dealer or manufacturer for advice. Always ensure that your remote has been kept in a safe place where no un-authorized parties can have access.

Summing Up

A well programmed multicode remote controlsystem is a worthwhile investment which can help you enhance your security.

Linear AP5 Receiver Gate Operator with Wireless Access Controller


Technology has come so far. In today’s world, we get to know about new inventions very frequently. The improvement in technology has made our lives more easy and convenient. It has not only made our lives comfortable but more secure as well. If we talk about security, we usually talk about locks.

Wireless technology has been revolutionary; it has helped people throughout the world get rid of the hassle of using wires. Wireless technology helps users safely operate devices without even touching them. The linear AP5 receiver has been designed to wirelessly communicate with gates or doors. This access controller can be used for a wide range of applications and is capable of controlling 2 magnetic locks, electric strikes, barrier gates and other safety devices at once.

Some of the best features of this security device are as follows:-

  • This gate and door controller provides enhanced security
  • The wireless technology in the receiver is capable of picking up transmitter signals from up to 500 feet
  • This receiver is easy to install and set up
  • The receiver comes with capacity for up to 480 remote control transmitters.
  • The controller is easy to manage. You can make necessary changes to the receiver through the programming mode as per your requirement.
  • The controller is cost effective and helps you avoid the monthly cost of your security guard.

If you’re in the market for a wireless access controller, consider the options available to help you enhance your security while also increasing your convenience. If you are serious about your security, take a closer look at wireless access controls to gain an additional layer of security for your property. This controller is ideal for all gated communities, gated homes, parking lots, campuses, schools and factories.

Multicode Remote Control – A Device for Improved Safety and Access


Garage door openers with remote controls make life simpler and easier. Now, you can drive into your garage by just pushing a button without the need to get out of the car to open your garage door.

Like any other locking system, remote controls too have a ‘master code’. A master code is the primary code that makes its user able to make adjustments to the system’s programming. In the past users used to have a remote control with single access code, but today with advancement in technology and security, the evolution of Multicode Remote Control has arrived. These remote controls give its users the ability to add multiple codes.

The master code is designed for the system owner, and the other additional codes are meant for the use of individuals who may need access but don’t have ownership of the system. An additional code can be added for those who need regular access to an area.


A good instance for the use of additional or multiple access codes would be for family members or friends who may need access. Another good use of multiple access codes would be for businesses. Most systems give you an ability to view a history, which shows who entered or exited the property along with the date and time it happened. This allows a business to track the identity, date and time of the incident which helps in providing a higher level of security.

An ideal tool for an enterprise to use is to have private codes for each individual. There are plenty of types of remote controls to suit distinct needs and purposes. Whether it is a business, or a residence a Multi-code Remote Controls can provide a solution for all and provides a high-end security offering.

Advanced Gate Operators For Round The Clock Security


In the past few years, we have seen a huge improvement in the way of we are now able to protect our home and businesses. We are always in constant search of finding devices that can aide us in protect our hard earned belongings and the technology has kept up with that demand when it comes to advanced gate openers.

With a durable and efficient gate opener installed on your gate, you can gain a sigh of relief that your property is protected while also providing quick and easy access to authorized residents or employees.

Depending on your requirements, you can opt for any high quality swing gate, sliding gate or dual gate openers. No matter what option you choose, you are sure to receive the benefit of the added security.

Installation of Gate Openers:

Though a professional installation should always be your first choice, it doesn’t mean that DIY’ers can’t give it a shot. You can easily install any good quality swing gate operator to your gate by just following the simple steps given in the installation manual. Advanced gate operators tend to produce a high level of force, that is why you always need to take some precautionary measures before, during and after their installation.

Benefits of Using Advanced Gate Operators:

Listed below are some of the most common benefits that one can gain from owning a gate opener:

  • Consistent Functionality.
  • Provides enhanced protection round the clock.
  • Easy to use.
  • Easy to install.

Modern Gate Operators For The Hassle-Free & Fail-Safe Security Systems


Keep your tiny tots, pets, loved ones and valuables safe from unforeseen danger with an automatic gate operator.

Advantages of Using Automatic Gate Operators:

The advanced locking devices are the best sources to secure your property. They offer a plethora of benefits to their users. We’ll point out a few of those benefits in this blog post today:

Fail-Safe Protection:

Security systems like the Linear GateStar 6000 provides infallible protection to the premises from unwanted entry albeit thieves, salesmen, wild animals or anyone who may want to intrude on your privacy or break in.

Hassle Free Operation:

Properties these days have gates that are rarely used due to the hassle of its manual operation but with an advanced locking device opening and closing of the gates have become a breeze. With automatic or electromagnetic security solutions, you just need to carry a simple remote control with you and press a button for the desirable operation.

Peace of Mind:

With a modern locking device, you can stay assured that the gate of your building, home or office is open or closed at the particular moment since these are the devices that don’t allow anyone else to operate the gates without your permission.

Remote Controlled Gates For Convenience And Unbeatable Security!


The discovery of remote control is one of those inventions that has received immence popularity since its introduction to the world. We now have remote controlled TVs, ACs and many more things. However, out of all those indispensable necessaties of human life, one thing that I am going to describe here is remote controlled gates.

Not to mention, remote controlled gates are very popular all across the world due to incredible exclusiveness and extraordinary features of securing prperties. It’s when we talk about security, the very first thing that strikes our mind is the entrance locks as entrance is the key factor for the security of any establishment. This is the place where Act 21A 1 Remote Control comes into place.

Some Top Features Of Act 21A 1 Remote Control Transmitter:

  • Supplied with quick-disconnect key ring
  • Compatible with all Linear access receivers and controllers
  • Factory programmed MegaCode format supports over 1,000,000 codes
  • 1.25″ W x 2.25″ H x 0.48″ D
  • RF frequency: 318 MHz
  • Two type 1616 lithium batteries supplied

How It Works?

The working procedure of a linear Remote Control transmitter can be best understood by the below steps:

  • The device sends a unique code when its button is pressed.
  • The receiver is programmed by “learning” the unique digital code sent by the transmitter.
  • The receiver will identify and activate only from the“memorized” transmitters.
  • The model number is typically printed on the back of the remote.

The functioning concept of Act 21A 1 Remote Control transmitter is not far different from other remote controlled devices. Users just need to press a certain button on a remote to have anything start or stop. When a button is pressed, a specific signal associated with that button is sent to the receiver installed in your gate. As soon as the signal is received, the gate will open automatically. The feature that makes the remote controlled gates more desirable than other alternative security measures is that these gates have battery backups, that is useful when there is a power cut as you are still able to enter your home with the use of remote.

The remote controlled locking systems provide the best security to your home and office structures as no one can open the gate without its remote. No matter how clever tricks and formulas the robbers and burglars may apply to open the gate, all will fall flat as it will stay shut or locked. Hence, there is no chance a thief can break and enter a building secured by a powerful protecting device like Act 21A 1 Remote Control transmitter.

When we talk about security, the first feeling that comes in mind is gate locks as a gate is the main thing to secure any building or place. This is the reason that Act 21A 1 Remote Control transmitter has come in the market that is known to provide unbeatable security as it’s impossible to open a remote controlled gate without its remote.