Monthly Archives: April 2015

Question regarding the Linear AK-11 Keypad

AK11

Phillip has a question regarding his Linear AK-11 Keypad

Question:
How can I keep the gate open with my keypad? I think that is called “Party Mode”

Answer:
Hello Phillip, the feature you wish to use on your keypad is called “ Hold Open Code”. Please use the instructions below for your reference:

Enter programming by pressing # 9 # then the Master Code (Default: 1 2 3 4 5 6)
1. Press 0 1 #
2. Enter the new code and press #
3. Enter the same code again and Press #
4. Enter 1 0 and press #
Repeat steps 1 – 5 to enter additional hold open codes.
When finished entering codes, press * * # to exit programming.

To return to the original setting, follow the same steps and in step # 4 Enter 1 and press #
When finished entering codes, press * * # to exit programming.

If you have any other question, do not hesitate to contact us toll free at 1-800-803-8093.

Linear 3089 Gate Operator Remote

multicode-3089-250

Looking for an easy way to operate your gate operator? I recommend the remote Linear Model 3089. It is a portable 1-Channel Visor Transmitter designed for automatic door and gate operator applications. By pressing the pushbutton it will send a signal to the receiver to activate your gate. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included.

It is a Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code. So you select your code with the dip switches only in one remote, then just copycat the rest of the remotes and you are all set!!!

The Model 3089 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers.

The dimensions of this easy to use remote are: 2.5″ W x 3.75″ H x 0.875″ D

For further information on this or other access control devices, do not hesitate to contact us toll free at 1-800-803-8093.